Thread: Viewing of huge touchpad mod for M1330

Circuit board is small enough to fit into the Express Card, but the height can be a problem ... remove might as well all the enclosure since I do not use Express Card ... Express Card wonder if they are compatible with the pin USB pin ... otherwise will need a cable emerging from the Express Card slot to connect to the USB port (or mod a cable from inside the Express Card slot on the motherboard USB ...

Ooo sounds interesting. I've been very interested in installing maybe something similar to my Asus Palmrest. Let me know how lucky you!

I really like this idea. Please tell me how I became probably do well in the summer = D
I do not have a fingerprint reader so you have plenty of room for mods =]

I ordered the touchscreen deal extreme week.... be delivered to my home in late May ... ()... Put then on again.

This is something I'd like to do well. My smart card reader is placed in such a futile manner that could remove and 3 mm with no space to work.

Haha I cannot wait to see the results! If your success I will do it too. Back at the end = p.

You say that W is a touch screen / digitizer. It is actually only the digitizer which is intended to be placed on top of a EEE PC screen so that it becomes a touch screen. Good luck converting the input as mouse digitizer digitizers are usually calibrated to just click the mouse wherever they touch, not just move the mouse around.

The thing that worries me is things 3.3v Express Card units, while in USB 5v ... for flash drives, maybe not, but for this device, maybe it requires more energy ... and how will I connect the pins ... Welding?

I will see if there are drivers.... otherwise, "two-finger scroll "?.... using a finger touch of the great keyboard for fast movement, using the thumb pad small precision.