Thread: Internal temperatures of your case in idle and full load

This is to inform the airtemperature inside the box using a probe temperature in idle andload.

I'm beginning, for my part internal temperatures aregiven in the hottest spot of the box (above my GTX295 expelling somehot air in). The full load temperature is given after an hour of yourfavorite game.

- Case: Z-Machine GT1000 @ 1000 rpm withventilos
- Idle temp: 7 ° C compared to the room (24 ° C / 31 °C)
- Full load temp: 14 ° C compared to the room (24 ° C / 38 °C).

Temp aerocool Bay (rad cm probes on the controller, a ventilos 1000trs, 1 intro, 1 extraction, and 2 for a stir inside) (proc and compartmentalized water cg)

piece was a 26/27 °
41/42 idle 47/48 ° · Full
the temp of the air in the case is much lower, but since the probes are on a rad, it is one of the hottest!

My probe is next to the extraction fan.

But above my GTX295 which unfortunately deport some hot air inside would have much better results if.

Regardless of the location of the latter, except of course if it is placed just behind the suction ventilos.

I think the temperature is too low a vote. For once he Mouin 30 ° in Martinique lol, And I'm Idle CPU 36 ° CM 50 ° GPU 43 ° 31 ° HDD.

3rik is your problem or the sensor is so you have half your pc is next to your window open in winter?

It really is as bogus survey because the temperature inside a box is anything but homogeneous. You can put the probe at 20 different locations and we will get 20 different temperatures.

In addition everyone has a different configuration (housing, ventilation, consumption) so we get only the values that mean nothing. Not to mention the fact that the probes used are often very rough on the measurement accuracy.