Instruction:-

Step 1

Jumper the interior CD/DVD drives. Each drive comes with a plastic connector that needs to be inserted on the appropriate pin pair at the back of the drive to designate the drive as a officer or slave. Insert the connector over the vertical pair labeled MA to designate the officer drive or the pair labeled SL to designate the slave drive.

Step 2

Mount the interior drives in the machine case drive bays. Secure each drive in locate using the screws that came with your new drives.

Step 3

Connect each drive to the motherboard using one of the supplied ribbons. Connect the connector of the officer drive to the end connector of the ribbon. Connect the slave drive to the middle section of the same ribbon. Finally, connect the slip to the motherboard connector.

Step 4

Plug the noises cables into each drive from the machine noses supply.