Thread: Ip camera installation

Hello, I want a friend luis up acamera ip, Konig wireless ip network camera nwipcam cmp-11. He wantsto put the wireless ok's good but I installed the leads connected tothe b RJ4 box.

Almost everything is going well except I cannot have the image when I connect to the IP address of the camera andI will live I have nothing on the screen. I know if it comes from thepc of my friend or not. his config: 448 Mb DDR XP Home SP2.

Myconfig (or is currently connect the camera: Vista Premium 4 gigabytesDDR.

that it can help me?

USING MICROSOFT INTERNET EXPLORER BROWSER + ACTIVEX

What to do on the PC in your browser settings IE8

Permission to install the ActiveX (unsigned) in IE8

tools
Internet Options
onlglet "security"
under "trusted sites" should lower the Security Level slider for that area to min
under "trusted sites" also click on the [Sites] in order to add the public address of the CAM>>> by unchecking the "HTTPS request" <<<

Firefox I already try but I know not even get into the interface of the cam, when I click "Sumit" Arpes putting user and pass nothing happens, clicking on the button has no action.

I have a small problem with my camera. when I'm home, I see my two cameras FOSCAM but when I'm outside on a pc in non-local network, I see a camera and the light of the other is orange. I get the following message: Failed to connect to the device: the device offline.

I had sent a message and did a test before posting, and it worked this morning nothing. so I followed the tutorial again and like yesterday by sending me a message, for now, it marche.il are 2 large and two small pictures. I think there are two links that I would not be selected. excuse me to bother you with that and thank you again for your help.

I can not write in this context is that the cameras are recognized.

when I go to configuration alias, I can not write at all. I think you're talking about the frame at the top right of the blue board (currency of the camera, not the nine nat box.

we must change the data in Camera1 and camera2 the same page multi currency?

faut'il also change in http port is 8081 and 8080 for one to the other, or faut'il change pages.

thank you again for your help.