Thread: Difficult to install memory ?

There motherboard
M / B GigaByte GA-MA770T-UD3P rev.1.0 (RTL) SocketAM3 <AMD 770> PCI-E + GbLAN +1394 SATA RAID ATX 4DDR-III
CPU CPU AMD Phenom II X4 925 (HDX925W) 2.8 GHz / 2 +6 Mb/4000 MHz Socket AM3

How difficult is it to install memory
Kingston HyperX <KHX11000D3LL/2G> DDR-III DIMM 2Gb <PC3-11000> CL7
with supply voltage of 1,7 V.

officially a standard processor is not supported, as well as luck depends on you and your expertise on the settings of the memory.By the way, do not stress the memory and, at the DDRII memory voltage 1.8v.

a processor can work with III, and co II Memory.

well, just the memory controller in the processor, and it is not so capricious to stress, such as the core i7. 1.7 v should not kill percent, but the frequency of memory and can harm.

Unfortunately, at work do not have access to other sites, could you quote here, if it is not too capacious source?

This is not a manufacturer, this is another brand, for which there is only cooperating with the actual producers and advertising / marketing / promotion. Same as hundreds of others (in terms of memory: partly Kingston, Corsair, OCZ, Patriot, Kingmax, Transcend, PQI, A-Data, Geil, Mushkin), is the same zero-attention as a manufacturer of memory (if you Memory serves a functional role, rather than decorative), but the remarkable specialization of professional graphics solutions nVidia.

The question arises - and why? The processor you are strongly dispersed?

No, not overclocked. Just in our city 2.3 companies with which you can deal with. This memory is available, and the rest just under the order. Generally DDRIII with virtually no choice, everything is still focused on DDRII. Here and asked whether there is much to be Trouble with its setting.

Thanks to all who responded.