Thread: How to read the GC with a 1080P C2D?

Hello,

I have a friend who has a config based C2D E5200, 4GB ram and a Gigabyte GA-73PVM-S2H without CG (he uses the graphics chipset in the CM), all connected to a Samsung 46-inch screen with max resolution (1980x1080 I think)

The config is sufficient for now but they can not play 1080P video (MKV for example) AC stutters too (for no 720P bp)

I lent him my CG (Vapor-X Sapphire HD 4850) is a little more fluid but are still a few jerks.

Dc he thought watching the range above HD5850 or HD6850 is but what it will do the trick? I think he'll also have to review its power supply (noname).

It is possible to have what he wants with his current config should be changed or PC?

For playback we used the latest version of VLC and windows media player (Seven 32-bit) with the latest Catalyst drivers pray at the site of AMD. The Pc is connected via HDMI (and it is fairly recent 12-18 months)

I'll watch what HD tune to start. The hardware acceleration (using the GPU to calculate the videos, AC turns on by itself or is an option to check?)

I have a HD4200 graphics chipset for my HTPC, no problem for HD. An HD 5450 is more than enough for that, the concern is also.

The objections that I loaned him running for 1 year on my pc and no problem (but on a screen 20 inches). The fact that AC is the 46-inch 1980x1080 not require too much resource? If the PSU noname is really moldy AC can come from? I'll watch the hdd but it is a priori good as the ram that does not appear to pose bp.

I thought the basis that the CG was a bit too rather weak as the CPU is not extra. Looking at the resource monitor while playing a video I am 48% of the CPU is busy decoding the video, how I can do to make sure that the GPU bump too?

Then, to begin with, graphics card which ever pump on a noname PSU! Then, should be tested with the latest version of VLC and go into the setting to enable hardware acceleration.

It would be nice if you're quiet to begin with, then the HD is what you read what you write sometimes? The HD streams are decoded in well with our cell phones, then think about it a PC card, even integrated when it is new, carefree supports this kind of flow.

I have an E5200 and I confirm that you do not need hardware acceleration for decode of the objections 1080p.le better to do is uninstall the software and ts codec and put a bank codec day as satsuki or otherwise, and use mpchc.

Ahlala must think of all gentlemen! It can also come from a concern at the disk level. But also a graphics driver rotten. It can also come from its operating system on which it has installed / uninstalled Rabbids 12,000 times. Besides it could also be a virus or spyware of 1512 on his machine! In short, to check all this: Formats the machine Install Windows 7 MPC-HC (My friend Google will help you willingly)

If you still have a reading problem, exchange the disc and restarts the procedure. If you still have the problem, place your tower to the air, an empty gas can and a fire under him and bought a PC and repeat the procedure. If you still have trouble reading one, I will lend you a rope.